Coolants, slideway oils. Guideway, KSS water miscible, GTL cutting oils, quenching oils, drawing oils, grinding oils, compressed air oils, corrosion inhibitors, AntiCorr, lubricating oils, machine oils, cleaners, degreasers for the treatment ...
GTL cutting oils are free of mineral oil. GTL coolants consist of environmentally friendly CNG (EAL) base fluid. From Houghton developed for machining Industie. GTL synthetic coolants.
- Better health through very small proportion of aromatic hydrocarbons
- High flash point is fire protection in industry
- Improved air quality in the workplace due to low evaporation. More cleanliness and less risk of slipping in the hall.
- Improved lubrication at high temperature on the cutting edge.
- Lower consumption due to lower evaporation. Kostengünsitger other synthetic base oils.
- High UV and aging stability for a high bath life.
- Low pour point reduces the risk of frost damage of the fresh oil.
- Energy efficient through low pump load
- Cutting oil for machining parts industry
- Multi-purpose oil for the machining of non-ferrous metals, cast iron and steel
- Powerful cutting, grinding and Neat with good extreme pressure properties.
- Grinding and cutting oil for gear production, profile and generating grinding
- High-alloyed cutting and Neat, use eg in the manufacturing of common rail injectors and pumps
- Cutting and broaching oil for demanding machining in automotive components
- Heavy-duty machining such as the spaces of racks for steering or workpieces made of nickel or titanium alloys
Metal working operations, and consists of many different materials.
Various metalworking fluids are mostly evaporation and fog. For some operations, the lubricants must evaporate or burn tei. They meet in a variety of viscosities your use eg: for grinding, honing, machining, stamping, flushing, cooling, broaching, deep drilling, tapping, cutting, hobbing, profile cutting, creep feed and profile cutting, shaping, drawing, rolling, pipe bending, tempering, and many further applications. For ferrous metals and nonferrous metals, ferrous metals, aluminum alloys, stainless steels, titanium, etc.
NEW NEW NEW: synthetic cutting oils GTL base oil. Successful since 01-2015 in use
Various water-miscible coolants are used. Our products are used chlorine, boron, nitrite and amine-free! The latest products are also free of formaldehyde. For decades, active and constantly evolving. Rule 611, VDI 3035 and BGR 143 are self-evident.
NEW NEW NEW: Titanium-aluminum water-miscible cutting fluid. Since 02-2015 successfully. Many roll clearances.
Corrosion protection has been designed to, inside or outside, to ensure the short or long-term protection for surfaces of the metals. This protection is needed so that moisture, water, salt and other substances stay away. The workpiece or tool can be handled and transported. There are dewatering fluids for short-term operation interruption available.
The additional use of AntiCorr powder is contemporary. It is blown and infiltrated with its monomolecular structure moist and watery places. When working necessary it is not necessary to remove the corrosion protection. After processing, "grows the machining point to", thanks to the monomolecular structure of AntiCorr.
Competence analysis with first-class laboratory equipment to the scanning electron microscope for the evaluation of cuts in the heat treatment. Target less consumption-resource-saving, clean, avoid water in the production steps. Hardening, annealing, tempering and annealing.
Competence analysis, process monitoring, quench monitoring, KSS analytics and monitoring. Accompanying sampling and analysis time set budget position for changing the bath. Oils do not last forever. Tags acidity increase, scale entry, water entry, etc. In ZTU note that needs to be partially cooled to minimize the delay.
With water-based process cleaners additional productivity and maximize profits, by helping, rework and reducing energy consumption.
Cleaners and degreasers are adapted to the post-treatment, electroplating, hardening and other surface-specific requirements of reprocessing plants and preceding rust removal. Dipping, flooding and spraying are the current methods for cleaning and corrosion protection, system cleaner, acidic or solvent-based cleaner according to individual processing in the overall process.
Water-miscible quenching concentrate AQUA-QUENCH BW / T is used both on induction and flame curing machines as well as in immersion quenching baths. The range of materials quenched in AQUA-QUENCH BW / T solutions ranges from unalloyed and low-alloy steels to higher alloyed steels.
GTL Cutting oil and GTL grinding oil. Cut-Max 903-12 is a high-alloy cutting and Neat, use eg in the manufacturing of common rail injectors and pumps. Machining hollow-alloy steels, stainless steels and heat resistant and austinitische steels, titanium, aluminum and magnesium alloys.
Ensis DWG 2462 is suitable for corrosion protection of steel and machinery of all types that are intermediate or stored for a longer period. Solvent-based, water-displacing corrosion protection agent, which leaves a thin, fat-like protective film on the surface after evaporation of the solvent content.
Non-water-miscible cold-flow pressing and forming oil as a highly additive and specially developed processing oil for cold-flow pressing, forming and profiling. Used for the production of screws and nuts made of steel and stainless steel. Also thermoforming operations on aluminum alloys.