helios_000017711424_Tellus S2 MX
search
  •  helios_000017711424_Tellus S2 MX

Shell Tellus S2 MX

€99.95
VAT included

high performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can decrease the efficiency of your hydraulic power system. Available viscosity 22, 32, 46, 68, 100

lube packaging: 20 Litre pail
lube viscosity: VG 46
Quantity
usual 10 workingdays or availability

High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications

·Bosch Rexroth Fluid Rating RDE 90245
·Parker Denison (HF-0, HF-1, HF-2)
·Eaton E-FDGN-TB002-E
·Fives (Cincinnati Machine) P-68
·ISO 11158 (HM fluids)
·DIN 51524 Part 2 HLP type
·ASTM D6158-05 (HM fluids)
·Swedish Standard SS 15 54 34 AM

·Long fluid life – maintenance saving
Shell Tellus S2 MX fluids help extend equipment maintenance intervals by resisting thermal and chemical breakdown. This minimizes any harmful sludge formation and provides better reliability and system cleanliness. Shell Tellus S2 MX fluids also have good stability in the presence of moisture, which ensures long fluid life and reduces the risk of corrosion and rusting, particularly in moist or humid environments.
·Outstanding wear protection
Tellus S2 MX is designed to meet the demands of hydraulic systems well in to the future, including new specifications such as Bosch Rexroth Fluid Rating RDE 90245 and enhanced extreme pressure performance in the FZG test (FLS 11 at ISO VG 32). It also demonstrates excellent performance in the tough Denison T6H20C (dry and wet versions) and the demanding Eaton Vickers 35VQ25. Shell Tellus S2 MX fluids can help system components last longer.
·Maintaining system efficiency
Excellent filterability and high performance water separation, air release and antifoam characteristics all help contribute to maintaining or enhancing the efficiency of hydraulic systems. Optimization of friction characteristics also helps reduce harmful stick-slip effects. An oil cleanliness particle count of ISO 4406 20/18/15 or better (measured at the point of filling) helps reduce the impact of contaminants on filter blocking, allowing both extended filter life and enhancing equipment protection.

·Marine hydraulic systems
Suitable for marine applications where ISO HV category hydraulic fluids are recommended.

Shell Tellus S2 MX fluids are formulated for exceptional foam control and excellent air release to facilitate efficient hydraulic power transfer and minimise fluid and equipment impacts of cavitation induced oxidation that can shorten fluid life.

·Industrial hydraulic systems
Shell Tellus S2 MX fluids are suitable for a wide range of hydraulic power applications found in manufacturing and industrial environments.
·Mobile hydraulic fluid power transmission systems
Shell Tellus S2 MX fluids can be used effectively in mobile hydraulic power applications such as excavators and cranes, except where significant ambient temperature variations are encountered. For these applications we recommend Shell Tellus S2 VX.

·Compatibility
Shell Tellus S2 MX fluids are suitable for use with most hydraulic pumps.
·Fluid Compatibility
Shell Tellus S2 MX fluids are compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids).
·Seal & Paint Compatibility
Shell Tellus S2 MX fluids are compatible with seal materials and paints normally specified for use with mineral oils.

Properties Methode Shell Tellus S2 MX 46
ISO Fluid Type HLP
Kinematic Viscosity @–20 °C cSt ASTM D445 580
Kinematic Viscosity @40 °C cSt ASTM D445 46
Kinematic Viscosity @100 °C cSt ASTM D445 6,9
Viscosity Index ISO 2909 105
Density @15 0C kg/l ISO 12185 0,856
Flash Point (COC) °C ISO 2592 220
Farbe ASTM D1500 L0.5
Water Separation Minuten ASTM D1401 20
TOST life mind. ASTM D943 5000
Pour Point °C ISO 3016 -30
55102204
15 Items

Data sheet

Property lubricants
HLP
Reference
Pourpoint -30°C

Please sent your proposal:

Suggest your price

Original price: 99.95 €

 

* Required Fields

Thank you very much. We will check and revert.