Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

cancel
Klüberoil 4 UH1 N
  • Klüberoil 4 UH1 N
  • Kluberoil 4 UH1 N VT Diagramm

Klüberoil 4 UH1 N (32- 680)

Klüberoil 4 UH1 N is a synthetic polyalphaolefin-based gear and multipurpose oil that meets the ever-increasing demands and higher power densities of today's transmissions. Klüberoil 4 UH 1 oils can be used in gearboxes for immersion bath, dip bath circulation and injection lubrication.

lube packaging
lube viscosity
Quantity

Klüberoil 4 UH1 N is a synthetic polyalphaolefin-based gear and multipurpose oil that meets the ever-increasing demands and higher power densities of today's transmissions. Klüberoil 4 UH 1 oils can be used in gearboxes for immersion bath, dip bath circulation and injection lubrication.

Available viscosities: 32, 46, 68, 100, 150, 220, 320, 460, 680, 1500 (680+ 1500 on request)

Packaging: 5L, 20L, 200L

Klüberoil 4 UH1 N is released by SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive, etc.

Approvals: for the food and pharmaceutical industries. They comply with the German Food and Commodities Act (LMBG, §5, para. 1, sentence 1) and meet the requirements of "guidelines of sec. 21 CFR 178.3570 of FDA regulations" and are in compliance with the requirements for NSF H1 registration

Application: Brush, oil can or drip lubrication (for example with chain lubrication). The low viscosities are also suitable for oil mist lubrication.

• Use with mechanical seals
• Application as a care spray for stainless steels
• Synthetic food grade oil
• USDA H1 approval
• NSF H1 registration requested
• Anti-corrosive
• Wide service temperature range
• Low germ, <100 cfu / g *

Klüberoil 4 UH1 N is a synthetic polyalphaolefin-based gear and multipurpose oil that meets the ever-increasing demands and higher power densities of today's transmissions. The use of high quality raw materials and modern additive technologies ensures the highest level of performance in the lubrication of all transmission components.

Klüberoil 4 UH1 N is NSF H1 registered for use in the food and pharmaceutical industries, compliant with FDA 21 CFR § 178.3570. It was specially developed for unpredictable contact with products and packaging in the food, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1 N contributes to increasing the reliability of your production processes. However, we additionally recommend a risk analysis, e.g. HACCP.

Klüberoil 4 UH1 N offers a high level of freshening capability. Your gearboxes are adequately protected against eating damage even under peak loads, lacking infeed, vibrations and vibrations. The good wear protection for both gear wheels and roller bearings enables a long service life of these components and ensures that the calculated service life is reliably achieved. So you can reduce the maintenance and repair costs.

The excellent aging and oxidation stability of the selected raw materials gives Klüberoil 4 UH1 N a significantly longer service life than mineral and white oils. Service intervals can be extended and maintenance costs reduced. In certain cases, even a lifetime lubrication can be realized. The good anti-foam and anti-corrosion properties ensure trouble-free operation of your gearboxes. The good elastomer compatibility prevents leaks and contamination from leaking oil.

The good viscosity-temperature behavior promotes the formation of a sufficient lubricating film over a wide service temperature range, even at elevated and high temperatures. This allows in many cases the use of only one viscosity grade, at both low and high temperatures. The optimized friction behavior of Klüberoil 4 UH1 N through the use of selected base oils reduces the power loss and improves the efficiency of your application.