- Online only
GLYSACORR P113-FP FrostProtect
€8,795.95
VAT included
usual 8 working days
GLYSACORR® P113 FrostProtect is an inhibitor concentrate with Headspace corrosion protection. In the application concentration of 50 vol% in water is GLYSACORR® P113 FrostProtect especially suitable as test bench coolant for new engines in the warm-up phase, which then transported for a long time or be stored.
Fields of application: Hot-test engine test stands, pressure tests, pump tests, leak tests. Not suitable as a permanent coolant, containing amine.
Recommendation: After the engine test, allow the engine to cool to temperatures below 40 °C before draining the coolant.
It provides the coolant with excellent corrosion protection properties for all metals and alloys used in engine construction in direct contact or in the vapor space.
Before using GLYSACORR® P113 FrostProtect must be diluted. Recommended concentration 50% vol.
Not suitable for the operation of engines.
For mixing, clean, not too hard water must be used. Not suitable are mine water, seawater, brackish water, brines and industrial wastewater
The analysis values of the water must not exceed the following limits:
Water hardness: 0 - 20 dH (0 - 3.6 mmol / l)
Chloride content: max. 100 ppm
Sulphate content: max. 100 ppm
Glysacorr reg. Trademark of BASF SE
UN 3267 CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains POTASSIUM-3,5,5-TRIMETHYLHEXANOATE), 8, II, E
Signal word Danger 
Hazard warning:
H314 Causes severe skin burns and eye damage.
Safety instructions (prevention):
P280 Wear protective gloves, protective clothing and eye or face protection.
Safety instructions (reaction):
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor / physician.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with water or take a shower.
Safety instructions (storage):
P405 Store locked up.
Safety instructions (disposal):
P501 Dispose of contents and container to hazardous waste disposal.
3 Items
GLYSACORR® P113 FrostProtect is an inhibitor concentrate with Headspace corrosion protection. In the application concentration of 50 vol% in water is GLYSACORR® P113 FrostProtect especially suitable as test bench coolant for new engines in the warm-up phase, which then transported for a long time or be stored.