Corrosion protection has been designed to, inside or outside, to ensure the short or long-term protection for surfaces of the metals. This protection is needed so that moisture, water, salt and other substances stay away. The workpiece or tool can be handled and transported. There are dewatering fluids for short-term operation interruption avail...
Corrosion protection has been designed to, inside or outside, to ensure the short or long-term protection for surfaces of the metals. This protection is needed so that moisture, water, salt and other substances stay away. The workpiece or tool can be handled and transported. There are dewatering fluids for short-term operation interruption available.
The additional use of AntiCorr powder is contemporary. It is blown and infiltrated with its monomolecular structure moist and watery places. When working necessary it is not necessary to remove the corrosion protection. After processing, "grows the machining point to", thanks to the monomolecular structure of AntiCorr.
AntiCorr 846 K - 18 forms a clear yellowish, dry-firm film. Especially suitable for protection of e.g. Parts, tools, spare parts, machinery, export preservation, indoor and outdoor storage, as well as for packaged goods. Suitable as wood lubricant.
Ensis DW 6055 is a long term rust protective suitable for metal surfaces likely to corrode in storage or use. Ensis DW 6055 is a water-displacing, solvent based rust inhibitor that leaves a temporary waxy protective film on metal surfaces. The product protects metal parts from the damaging effects of moisture, air, detergents & other contaminants.
Ensis DWG 2462 is suitable for corrosion protection of steel and machinery of all types that are intermediate or stored for a longer period. Solvent-based, water-displacing corrosion protection agent, which leaves a thin, fat-like protective film on the surface after evaporation of the solvent content.
Corrosion protection for the vehicle and metalworking industry - workpieces - tools such as underbody, wing bottom, axles and transmission components as well as for applications, which require a good and durable corrosion protection. Resistance: to water, especially salt water, grease, brake fluid, sandblast effect ...
RUST VETO 310 is a mixture of mineral oil with organic corrosion inhibitors, which provides long-term protection against corrosion. RUST VETO 310 is normally used hot (between 50 and 60 ° C) in a 10 to 15% emulsion. Depending on the particular application, the agent may also be used in a concentration range of 3% to 25%.
Water displacing, temporary corrosion inhibitors [ISO 6743-8 RFF] Dewatering fluid and corrosion protection RUST VETO DW 162 forms an imperceptible film. Is effective on ferrous and nonferrous metal. It contains for pleasant use a combination of low-odor additives and is free of barium. Dewatering anticorrosion fluid