• please sent email
Shell PANOLIN eCOOL HP heat transfer
search
  • Shell PANOLIN eCOOL HP heat transfer

Shell PANOLIN eCOOL HP heat transfer

Shell PANOLIN eCOOL HP Heat Transfer Fluid Fully synthetic readily biodegradable heat transfer-cooling fluid, Biodegradable OECD 301B >60% Meets EN 16807-2016 criteria of bio-lubricants and biobased lubricants,

PANOLIN eCOOL HP, EAL Kinematic Viscosity @400C mm2/s - 9,3, Pour Point degree C minus 60,

lube packaging: Drum 209 Liter
Quantity

Performance, Features & Benefits

·Maintaining system efficiency

High moisture tolerance and can absorb up to 1000ppm water without changing the dielectric strength. Lower pour point allows operational efficiency at very low temperatures. High thermal conductivity properties help effectively transfer heat and readily take up heat from the environment.

·Safety

High flash point compared to conventional mineral oils.

·Lower Environmental Impact

Recommended for use in environmentally sensitive areas - offers reduced impact of leak or accidental spillage into the environment compared to conventional mineral oils. Readily biodegradable, biodegraded by over 60% after 28 days in the OECD 301 B carbon dioxide evolution test. Low Ecotoxicity, classified as ‘not harmful’ when tested as water-accommodated fractions (WAFs) according to OECD and EPA test guidelines. Tested to Industry Standard by 3rd Party Lab, all Shell PANOLIN products are tested against OECD 202.

Compatibility & Miscibility

·It is strongly recommended that an oil sample is taken from the system following changeover and analysed via the Shell Rapid Lubricants RLA Analysis service to confirm the new fluid charge is fit for use.

·Fluid Compatibility

Shell PANOLIN Fluids are miscible with mineral oils.

However, in order to ensure that the environmental properties and performance of Shell PANOLIN Fluids are maintained, the system should be drained and flushed thoroughly when changing fluids.