- please sent email
Hydraulan 406 ESI BMB break fluid
HYDRAULAN 406 ESI BMB brake fluid SAE J 1703, SAE J 1704, FMVSS No. 116 DOT 3, DOT 4 and DOT 5.1, ISO 4925 Class 6, JIS K 2233 Class 6, fossil raw materials replaced by bio-based raw materials,
Use as brake fluid in motor vehicles and industry (also as hydraulic fluid),
Brake fluid for hydraulic brake and clutch systems with a boiling point of at least 265 degrees C and a wet boiling point of at least 180 degrees C,
Due to the low low-temperature viscosity, particularly suitable for additional units such as ABS, ASR and ESP/DSC, Hydraulan 406 ESI is formulated on the basis of glycol ethers and their boric acid esters, Hydraulan 406 ESI contains effective corrosion inhibitors, antioxidants and lubricity additives.
HYDRAULAN® 406 ESI is highly suitable for all levels of autonomous driving and comes as BASF's response to further elevate the safety of vehicles in the future.
This innovation is also available as HYDRAULAN 406 ESI BMB solution, where fossil raw materials are replaced by bio-based raw materials at the beginning of the value chain according to a mass balance approach.
Approvals:
Mercedes-Benz Cars MB 331.0
Daimler Trucks & Buses DFTR 30B 100
Robert Bosch GmbH N28 BS302
Polestar
Volvo Cars TR 33413395-002
HYDRAULAN® 406 ESI has been formulated to provide superior lubrication.
- Elevates the benchmarks for a superior brake safety performance through high wet and dry boiling points, maximized lubricity and very low viscosity
- Achieves superior brake safety performance through outstanding brake response
- Achieves long-lasting brake safety through minimized sealant and elastomer wear
- Ensures a very low viscosity even at low temperatures
- Protection of overall brake system through excellent corrosion protection for metals and good lubricity for low wear during operations
- Secures freedom to operate through full regulatory compliance, e.g., REACH
- Reduced CO2 emissions when applying BMB version
This ensures the long-term integrity of the brake system’s sealants and elastomers and therefore, extends the durability of the whole brake system. HYDRAULAN® 406 ESI also complies with latest brake system technologies such as electro-hydraulic brakes and latest brake fluid standards (no noise, no wear)
Hydraulan 406 ESI ensures that natural rubber (NR), styrene-butadiene rubber (SBR) and EPDM rubber swell in accordance with the specifications.
Handling
Brake fluid is hygroscopic and must be stored in tightly sealed containers. After removing the fluid, the containers must be closed again immediately.
Storage stability
Hydraulan 406 ESI has a shelf life of at least five years when stored properly in original sealed containers at temperatures of no more than 40°C.
6610485011
HYDRAULAN 406 ESI BMB brake fluid SAE J 1703, SAE J 1704, FMVSS No. 116 DOT 3, DOT 4 and DOT 5.1, ISO 4925 Class 6, JIS K 2233 Class 6, fossil raw materials replaced by bio-based raw materials,
Use as brake fluid in motor vehicles and industry (also as hydraulic fluid),
Brake fluid for hydraulic brake and clutch systems with a boiling point of at least 265 degrees C and a wet boiling point of at least 180 degrees C,
Due to the low low-temperature viscosity, particularly suitable for additional units such as ABS, ASR and ESP/DSC, Hydraulan 406 ESI is formulated on the basis of glycol ethers and their boric acid esters, Hydraulan 406 ESI contains effective corrosion inhibitors, antioxidants and lubricity additives.