• Aero-Fluid-aviation_1039352226

AeroShell Fluid 31

AeroShell Fluid 31 superclean, ASF 31 synthetic aircraft hydraulik fluid fire resitance, ASF31 operating temperature -40 °C to +205 °C, ASF 31 dyed red,

AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. High Technology additives to provide oxidation and corrosion resistance, antiwear, and anti-foaming protection, useful operating temperature range is –40 °C to +205 °C, dyed red coloured, AeroShell Fluid 31 is superclean filtered to ensure optimum performance in particulate monitored systems, 


Specifications, Approvals & Recommendations
· Approved MIL-PRF-83282D (US)
· (MIL-PRF-83282D) (British)
· Equivalent to DCSEA 437/A (French)
· NATO Code H-537
· Joint Service Designation OX-19

Main Applications

·AeroShell Fluid 31 is recommended for use in aircraft,ordnance, and missile systems operating from –40 °C to +205 °C . This fluid should be considered for use in auto pilots, shock absorbers, brakes, flight control systems, hydraulic servo-controlled systems and other systems using synthetic elastomer seals. An increasing number of aircraft manufacturers now recommend use of this type of fluid in aircraft hydraulic systems in preference to mineral hydraulic oils. This move has been prompted by need to use fluids with better fire resistant properties.

·AeroShell Fluid 31 is also approved for use in the Honeywell (formerly Garrett) cooling turbine (cabin air compressors). Increasingly this type of hydraulic fluid is being adopted for use in hydraulic systems of military aircraft in place of mineral hydraulic fluids.

·AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials.

·AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and 71 and can be used in systems designed to operate with MIL-PRF-5606, MIL-PRF-6083, MIL-PRF-87257 and MIL PRF- 46170 fluids.

·Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 31. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

Note: BAFA end-use certificate required outside the EU

Please sent your proposal:

Suggest your price

Original price: 0.00 €


* Required Fields

Thank you very much. We will check and revert.