EAL Battery Saw Chains Fluid (water based) Medialub 3000, 2000

Medialub 3000 AKKU must not be mixed with synthetic or mineral oils, but also not with vegetable oil-based lubricants. Mixing causes technical malfunctions!

When changing the product from a mineral oil or vegetable oil based lubricant to Medialub 3000 AKKU for the first time, the cleaning recommendations for the tank of the electric and battery saw must be observed!

Dilution with water is not recommended!

Wood containing tannic acid (e.g. oak) may discolour optically. This discoloration has no effect on the lubricating properties of the product!

In order to avoid corrosion, it is recommended not to put on the chain guard immediately after completion of the work. This can cause the water on the sword and chain to evaporate. Alternatively, the sword guard can be provided with some holes to allow the water to evaporate. The chain guard must be fitted to transport the chainsaw.

In contrast to commercially available chainsaws with combustion engine, the temperature in the lubricant tank of a battery and electric saw hardly increases. As a result, the viscosity of conventional lubricants increases sharply as the temperature drops, and the lubricating performance on the chain and sword decreases.

To the product:

In contrast, the viscosity of Medialub 3000 AKKU remains almost stable at a temperature between -10 °C and approx. 20 °C (see diagram). At temperatures above 20 °C, Medialub 3000 AKKU initially becomes slightly more viscous. This ensures a constant lubricating effect at lower temperatures and protects the oil pump. It also prevents premature loss of lubricant on the chain at higher temperatures.