Optimol Paste PL
€279.95
VAT included
usual 8 working days
Black Assembly Paste With MOS2 for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures. For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rim
OPTIMOL™ PASTE PL is especially suited for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures. For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we recommend the use of OPTIMOL PASTE PL SPRAY.
- For screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°F
- For sliding bearings, bushes and toothed wheels.
- On drive trains in the automotive industry.
- For base lubrication of slide ways, guides and joints.
- For good separation of tool and work piece during hot shaping of metals.
- Temperature application range: - 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to +600°C/+ 1112°F)
- Wide range of applications.
- Immediate lubricating effect.
- Easy spray application.
- Economical in use.
- Thermally stable.
- Excellent emergency running properties due to especially selected solid lubricants.
- Maximum load carrying capacity.
- Extremely low coefficient of friction.
- Good corrosion protection.
- Prevents fretting corrosion.
- Good adhesion and separation.
- Prevents stick-slip.
Black Assembly Paste With MOS2 for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures. For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rim