AQUALINK 300F VER2

Benefits

• Fluorescent leak trace detection dye
• Inhibited to prevent corrosion of ferrous and non ferrous materials
• Resistant to bacterial and fungal growth
• Excellent lubricity characteristics
• Stable in the presence of sea water contamination
• Coefficient of thermal expansion (volumetric) 0.0005/°C
• Compatible with down hole chemicals
• Thermal conductivity 0.0042 W/M/C
• Cefas rating D (UK) and Yellow with NEMS (Norway)

• Fluorescent fluid pink - transparent
  Kinematic viscosity @ 40ºC, cSt   2.0
  Specific Gravity at 15.5ºC            1.06
  Flash Point (IP35 ASTM D-92)      None
  Pour Point (IP 12 ASTM D-97)      -30GradC
• Bulk Modulus 2.6 x 109 N/m2
• Maximum recommended fluid bulk holding temperature 60 GradC
• Thermal Stability (Pressurized System) 130 GradC
• Lubricity Tests ASTM D-2670: Coefficient of friction at maximum test load of 4,500 lbs.      0.04/0.05

Applications

AQUALINK 300F VER2 can be used as the hydraulic control fluid in both subsea production control applications and in closed-loop BOP control systems on jack-ups and platforms. It is water soluble and used neat.

Environmentally friendly Biodegradable closed loop BOP and Subsea Control Fluid, Jack-Up BOP control fluids
•Environmentally-friendly water glycols
•Surface BOP lubrication applications
•Closed system applications
•Replace mineral oils

Aqualink 300F VER2 is a ready-to-use biodegradable water glycol hydraulic control fluid specially designed to meet the requirements of closed loop hydraulic systems as found on Jack-up rigs and direct or multiplexed electro hydraulic subsea systems, providing optimum reliability, improved lubricity and fast hydraulic response times.

Metals Compatibility
Iron, steel, copper, bronze, brass, tin, nickel, stainless steeland anodised aluminium are all compatible. Zinc, cadmium and magnesium are not recommended and should be avoided or replaced.

Seals
Seal material properties can vary within a classification depending upon compounding techniques. Compounding can enhance or diminish various properties and characteristics.
In the case of Buna ‘N’ certain formulas will be more resistant than others. This can also be said for some of the urethanes.
Leather and cork are best avoided. Consult your packing and seal supplier for specific recommendations.
AQUALINK 300F VER2 is generally compatible with natural rubber and pure synthetic rubber packing’s and seals such as Buna ‘N’ (Nitrile), Butyl, Viton, Teflon, Nylon and Silicone.

Thermoplastic Hose Liner Material

Hytrel Polyester Elastomer
High temperature compatibility tests have shown that AQUALINK 300F VER2 provides acceptable resistance to physical change in the properties of Hytrel, compared with current water based subsea control fluids.

Paint

Likely to have a softening and stripping action on conventional paints. Where conventional paint coatings have to be replaced, those with an acrylic epoxy or silicone base should be suitable.

Filters
Borasilic glass micro filters, Cellulose and Phenolic Resin treated filters are suitable for use.
AQUALINK 300F VER2 is filtered to meet NAS1638 Class 6 cleanliness level in the drum.
Further information relating to system’s compatibility is available on request.

Storage
The products should be ideally stored in dry conditions.

ADR- None

Signal word: Warning
Hazard statements :
H302 - Harmful if swallowed.
H373 - May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Prevention:
P260 - Do not breathe vapor.
P270 - Do not eat, drink or smoke when using this product.
P264 - Wash thoroughly after handling.
Response: P314 - Get medical advice or attention if you feel unwell.
Storage: Not applicable.
Disposal: P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.

The data given are not legally binding, as other important information are necessary before using these products. Please contact us.

Refer to MSDS for proper handling and disposal. Please note that the MSDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative.
NOTE: Read and understand all precautions on container labels before using this product.