Ensis DW 1255

Long-term protection + final preservation:

- (semi) -finished automotive + mechanical engineering components, such as Valves, gears, camshafts, housings, bearings, chains, motors, fastening elements, brake systems, precision components with highly refined surfaces

- Phosphated or burnished surfaces by filling the microporosity

Materials + equipment during overseas shipping if properly packaged and secured.

Particularly resistant to contact with alkaline grinding solutions, cooling lubricant emulsions + acidic rinsing liquids.

Flash point 48 ° C

Viscosity at 20 ° C (in cSt) 2

Film thickness (ym) <3

Storage temperature + 5 ° C to + 25 ° C

- - -

- Economical: quick and clear separation of the displaced water, increased bath service life, extended lubricant change intervals.

- Economical: thin film with high performance, compatible with most lubricating oils, washing off is usually not necessary.

- User-friendly: dearomatised solvent, free of heavy metals such as barium.

- User-friendly: the dry film is not sticky and therefore more pleasant to use.

- User-friendly: low odor, making it easier to use.

- Quality: neutralizes fingerprints in the event of accidental contact with bare hands.

     UN3295

Signal word

DANGER
Hazard warnings
H304 - May be fatal if swallowed and enters airways
H336 May cause drowsiness and dizziness
H226 - Flammable liquid and vapor
EUH066 - Repeated exposure can cause skin dryness or cracking
P-Phrases - Regulation (EC) §28, No. 1272/2008
P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor / physician
P331 - DO NOT induce vomiting
P304 + P340 - IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing
P210 - Keep away from heat / sparks / open flames / hot surfaces. Do not smoke
P403 + P233 - Keep container tightly closed in a well-ventilated place